Sunday, May 21, 2017

A Visit to Sungei Road Thieves' Market - My Thoughts and Rants

Welcome to The Watch Post, readers, and today we'll be taking a little detour from our usual review.

Firstly, if you don't already know, I am based in Singapore. At just over 700 square kilometers, Singapore is a tiny place, and is in fact one of the smallest countries in the world. The government enforces the rule of law with an iron hand in this country, not just in jurisdictions such as criminal offences but to areas such as recreation and leisure as well.

Case in point, shisha (or hookah), one of the main draws for visiting Arab street (our hipster area) was banned in July last year. In the name of fairness, I should disclose that the government gave one and a half years notice in before the ban was actually enacted. Then, there was also the restriction of alcohol consumption in April 2015. While it is true that these bans were to address legitimate concerns (tobacco being bad for health in general and the alcohol ban due to the 2013 Little Indian riots), I feel that the way these laws have been passed are a very high-handed way to handle things.

I fondly remember the days what clubbing was like before the alcohol ban kicked in; it was a rite of passage for young Singaporeans to sit along quiet roads for pre-drinks, getting wasted on alcohol that had been obtained from outside the club (much cheaper). The trash talking that ensued when everyone was starting to get tipsy was where things got really fun. This is rarely an option these days, as public consumption of alcohol after 10.30PM is against the law. Way to go, nightlife in Singapore.

Sadly, I must say that the trend of high-handedness continues. Come 10th July this year, Singapore's only perpetual flea market that has been operating for over eight decades will be forced to cease operations. Also known as the Sungei Road Thieves' Market (so called because thieves would allegedly sell their stolen/illegal goods here in the 1930's), the loss of a flea market is significant because this is the only such flea market in Singapore. Anyone can setup shop here and peddle their goods (as long as it is not new, part of rules to sell here), without paying rent whatsoever. This is the entire premise of the flea market.


Strangely, I have never been to the Thieves' Market all my life. So, knowing that its days are numbered, I paid a visit to Sungei Road today. Unfortunately, and I apologize in advance, I didn't take any pictures of the goods being peddled. Know this though, if this is being posted on The Watch Post, that's because it involves watches.

You can just about find anything here, though I would seriously doubt the functionality of the electronics sold here. There was clothing which looked very well-used, old pottery and stamp collections, vinyl records and pirated DVD collections, heaps of electronics (old Nokia phones, Sony Ericsson Walkman phones which reminded me of my secondary school days), and lots of watches as well. Some of the items here are so well-used that well, to be honest, I'd call them junk. As in they were literally what you'd throw into the trash, but are instead being peddled here. And I loved it everything about it; the kind of goods being sold, the makeshift shelters and sales stands, shady sales practices were all part of the experience that brings one back to a different time. I imagine before Singapore became so built-up and before everything became so regulated that many more marketplaces were actually like that.

Why is it going away? Two words; residential development. The cynical side of me is thinking 'Why the hell do we need another residential development?' Granted, the flea market is right smack in the middle of some very prime land. Do we really need another residential development to be exactly here though? Especially when the cost of developing this residence means that we have to give up on something so culturally significant.

The flea market is at the heart of Singaporean culture; it cannot get any more Singaporean than this. During my visit today, I saw uncles engaging in the fine art of salesmanship, Singapore-style. That means with lots of Hokkien expletives thrown into the mix, and half-naked uncles in their 60's and 70's puffing on cigarettes as they persuaded you to buy their wares. Certain hawkers were blasting the radio through loudspeakers and providing a service to their neighbours (or disservice?). Haggling was happening to my left and right. Where do you get to see all that in a modern shopping mall?

Of course, I realize that I enjoyed this experience only because it is novel. I'd rather quickly get irritated by the lack of regulation if I had to go about my daily chores at such a marketplace. But that's exactly my point; this is the only place left in Singapore where one can get such an experience. With that, I think the closure of Sungei road flea market will be something that just makes Singapore that little bit duller, something which the government has been getting very adept at over the past few decades.


My experience at Sungei road was absolutely delightful and I highly recommend anyone who can to pay a visit to Sungei Road Thieves' Market before it is all over. I think you will find that the Thieves' Market will give you an experience that can hardly be replicated in your generic Orchard road shopping mall. It's dirty, it's hot, it's full of goods without pretty presentations and most of all, it is a novel, refreshing experience. This country continues to surprise me with its quirks and oddities, even as I think I'm about as true-blue as a Singaporean can get. I just pray that the Singapore government will stop destroying our own culture as they go about preaching on the importance of the Singaporean identity.

Wednesday, May 10, 2017

Review of Panerai "Mini Fiddy" Homage - Return of the Getat?

So, it has been almost three years since my attempt to order a Getat Mini Fiddy, after I was impressed by the quality of his Luminor homages. The review of that piece never materialized as the watch was not functional when I took receipt of it. The events that unfolded after left me wanting to put the entire experience behind me and never think of dealing with Getat again. Today's post hasn't bucked that trend; I haven't had any dealings with Getat since then.

Not like it matters much honestly, from what I can see, Getat is either in the process of exiting the watchmaking business or he already has. His website hasn't been updated since he introduced his new 1:1 cases for the Luminor, Fiddy and Radiomir lines which was years ago. He has only had one case option (PVD black) for the Fiddy range of watches for years now and hasn't restocked since. The last email which I sent to him in November last year bounced back. Perhaps Getat has finally decided to throw in the towel after years of receiving PayPal disputes, or has just grown tired of watchmaking in general. For better or worse, I think it's just sad that the consumer has one less choice in the market.

Regardless, I managed to come across a Mini Fiddy homage recently on the used market, which the seller informed me was in fact a Getat. This was of course, perfect for me. In spite of the bad experience with Getat three years ago, I actually continued wanting a Mini Fiddy homage made by him. To me, the level of customization plus the price for which he offers them made his homages more desirable than the ones from other sellers such as Jackson Tse or Davidsen. Knowing that I had to fill the void in my heart, I met up with the seller and we transacted. And there it was, a Mini Fiddy was mine. Without further ado, I present to you: Getat's Panerai Mini Fiddy homage.


And the specifications of this build are as follows:

- Case style: 44mm "Mini Fiddy"
- Dial: Matte black dial with Marina Militare wording
- Buckle style: Pre-V
- Case option: Brushed steel with polished bezel, see-through caseback
- Dial lume: Super-LumiNova C3
- Hands lume: Super-LumiNova C3
- Crystal: Sapphire with AR coating, mineral crystal for caseback
- Hands color: Gold
- Movement: Normal stainless steel
- Stitch color: Black
- Strap option: Vintage wooden brown

A quick note before we commence with the review, I cannot guarantee with complete confidence that this is a Getat. Parnis and Marina Militare homages sellers are a dime a dozen these days, and I've seen some from Parnis which look exactly like my piece. The only telltale sign I have that gives me some confidence is the strap. My previous Getat has a strap with the exact same style of stitching as the one here. This is the only form of confirmation I can provide unfortunately. For the purposes of this review, I will be assuming that this is from Getat so please be aware that this may just have been a Parnis/some random PAM homage in actual fact, and that your expectations may be skewed if you are intending to buy a Getat based on this review.

To start off, let us appreciate some of the rich history behind the Fiddy, otherwise known as the 6152-1. Initially created as the answer to the Italian Royal Navy's calling who commissioned Panerai to produce a dive watch for them back in the 1950's, the Fiddy has come a long way since then. Coming in at 47mm, the Fiddy is a large watch even by today's standards, and must have been an absolute beast back in the day. Today, owning an original Fiddy from the 50's is an affair that will set you back hundreds of thousands. Panerai, in acknowledging the popularity of the Fiddy design, have themselves released many homages of the original Fiddy. The first homage of the Fiddy was the PAM127, released in 2002. Since then, there has been the 212, 213, 210, 233, 270, 311, 317, 275 as well.


But wait, didn't the title mention "Mini"? Indeed, the Mini Fiddy comes in at a "measly" 44mm in diameter, a size which Panerai has never officially produced. The 44mm was probably the brainchild of some Chinese rep maker who, somewhere along the line, felt that there was a sizable market for Fiddy lovers who wanted it to be smaller. Thus, the 44mm "Mini Fiddy" was born. The Mini Fiddy is the modern-day Fiddy equivalent of a Luminor. Make no mistake though, the Mini Fiddy is hefty. It has a real presence and weight to it, and one can definitely feel it on the wrist.


 Two things set the Fiddy design apart from the Luminor which we've all come to know and love. The first of which is the design of the case itself. As you can see from the above comparison, the Fiddy case features lots of curvature which stylistically is a very big departure from the Luminor, which is generally a watch that features much straighter design throughout. The curves on the Fiddy are quite enchanting to say the least, I usually spend a good minute or two appreciating the shape unconsciously whenever I am handling the Mini Fiddy. The case itself is made to a quality that I am very satisfied with. There are no machining marks obvious enough to notice and the finishing is most satisfactory. The case comes in a fine brushed finishing that has been very well done while the bezel is polished. Top marks for the quality of the case.

PAM127 on the right, notice the extremely pronounced bubble crystal
The other distinctive feature of the Fiddy was the extremely pronounced bubble-like crystal. Supposedly, this made reading the watch easier when one was underwater. Not so much on Getat's Mini Fiddy though, as it only features a domed sapphire crystal which is a far cry from the original. Sapphire, as we know, is not the easiest material to work with. To put a bubble sapphire on the Getat probably meant that prices would be jacked up considerably or either that Chinese rep makers just had a hard time replicating the shape of the original. While it's unfortunate that a core aspect of the Fiddy DNA is not replicated here, a domed sapphire with AR coating is still very nice on its own.

Not so much on the Mini Fiddy homage
 The dial on this piece has seen upgrades since my last Getat. You can clearly see that the words Marina Militare punched into the dial, as the indentations are highly visible. I believe this is how authentic PAM dials are like too, so apparently these Chinese rep makers have been stepping their game up. As with the Luminor homage, this piece features the famous sandwich dial as well. The sandwich dials is a nice variation from the usual run-of-the-mill printed dials. To further accentuate the aesthetics of the watch face, we throw a set of gold-colored hands into the fray. As you may have guessed, these hands are reflective as hell and they have a way of dancing with the light that hits them. There appears to be some dirt or fingerprints of sorts on the tips of the minute hands, though I have to say I'm not OCD about these kinds of things and it hasn't subtracted from my enjoyment of this watch.


Next, we'll go over a favourite topic of mine in analog watches; lume. We'll be going over two aspects regarding this; performance and application. To kick things off, let's just say that the lume on this piece is phenomenal. I'm talking about performance that is nearly on par with Seiko, which is absolutely astounding for a rep. Seiko, as we all know, are kings in the game of lume performance and their lume is about as good as you can get with luminous paints. Chinese rep makers don't have the facilities that are availed to Seiko, and how the rep makers are able to put out this level of lume performance really surprises me. 

Compared with my Seiko SBDN025, these two are really neck and neck. The Mini Fiddy is capable of the "daytime bloom" effect, which is the event that happens when you walk from a sunny outdoor area into a well-lit indoor area but the lume on the watch is still screaming with brightness. Still, I'd give the Seiko as having a most discerning edge over the Mini Fiddy. Application is nice, clean and even, with no visible specks and blemishes as was the case with my previous Getat. This level of consistency almost makes me think that the lume was machine applied (or perhaps it really was?). Regardless, I was absolutely blown away by the lume on this Mini Fiddy and it has far exceeded my wildest expectations. This is not just C3 lume in name, but also in performance.


The front of the Mini Fiddy is a marvel to behold. Everything about it hits the right spots. A nicely domed AR coated sapphire, a dial that is several steps up from my previous Getat, gold hands that dance with the lights and spectacular lume performance. I have a feeling that if you're able to get hold of a Getat which has been well-made, you'll be marveled at the quality as well.


Flipping it over to the back, we once again see the same movement that was in my previous Getat, a Chinese-made 6497 which I believe is running at 2.5Hz (18,000bph). Again, you can see the Panerai-esque bridges, which the makers have done a commendable job on. In terms of timekeeping, I shall update when I get the chance to measure it over a period of time (it's not the easiest to test when PAMs have markers in 5 minutes divisions). The thing about Chinese-made clones of ETA movements is not that they are poor performers or are mechanically inferior, but rather due to their suspect QC and assembly conditions. They are often poorly lubricated out of the factory and have random particles trapped in them (think human hair, skin) due to the less strict controls while assembling. Overall, while I'd say that these Chinese-made 6497 clones are good enough for what they do, I'd much rather have a plain-looking authentic ETA 6497 beating away inside, knowing it has gone through ETA QC.


Looking at the crown guard, I have good things to say here as well. Steps have definitely been taken to improve the quality in this aspect. When flipped out, the lever no longer flops around like my previous Getat did. The lever now features a roller at the part which comes into contact with the crown, meaning it no longer scrapes the crown as you push it back into the lock position. The tension to open/close the lever has also been much improved; it needs more force to be opened/closed now and really seems to be pushing the crown into the case which is an important aspect of water resistance. With that said, I still don't ever recommend submerging any sort of PAM homage into any form of liquid, regardless of the water resistance claims made by the seller. Perhaps the cases were really manufactured with water resistance in mind, but it is the assembly that I wouldn't place my trust in. Water resistant assembly techniques (lubricating O-rings etc.) is as important towards achieving true water resistance as is the design of the case.


By now, I apologize for having drawn so many comparisons with my previous Getat, but I have to do another with regards to the strap. I believe this is the Hazel Grey strap with the Pre-V buckle. Qualitywise, this is the same as the one as my previous Getat, which is to say it's decent for the price you're paying. It's no Ted Su or Jules Verne for sure, but it is good enough for you to wear while you hunt for a better strap. PAMs are so versatile when it comes to straps and the ease of changing straps with those screw bars makes it such that even if this strap was terrible, it wouldn't be much of an issue. For what it's worth, the strap here won't amaze you, but it is a decent enough strap.

This has been one of my longest reviews and I've covered the areas which I thought were more interesting. I'd like to wrap up this review with my conclusions on the venerable Mini Fiddy. The build quality of the watch head itself has improved considerably over my last Getat, which in itself was already quite good. There have been significant improvements made to the case build quality (especially the crown guard), the dial, and the lume. The movement itself remains the same, which is a solid workhorse though QC remains a problem with these Chinese-made movements. The strap is also decent enough, and is a part of the watch that can easily be replaced if you're unsatisfied with it. Overall, I am very happy with this acquisition. When you look at it as a whole, it really surprises you what you can get for SGD 250 on the rep market these days. Justifying a luxury watch is a hard thing for me to do, which is why I'm so glad that these Chinese makers exist and it is for the same reason I'm sad that Getat seems to no longer be actively in the scene.


I'd just like to end off this post with a reflection on the state of the collection. I have three pieces now (Seiko SBDN025, Mini Fiddy homage and the Casio G-Shock DW5600E-1V) which I feel puts me in a very good position right now, horologically speaking (if there is even such a word). The Mini Fiddy serves as the watch I wear for work as well as for formal events. The G-Shock serves as the watch I wear when going to the gym, a run or going to reserve army call-ups. The SBDN025 fills the gap in-between; it feels just at home in a formal environment as it does at the gym.

On a side note, I'm happy that I didn't give up on my interest in watches totally, which I almost did during the later parts of my university days. I'm also glad that I maintained the blog (even though reviews have been getting fewer and further) but the fact is that I just do not acquire watches at the rate I used to when I was a student. Incredible as it may sound, reading my old posts not only allows me to review my writing skills back then but also allows me to review my growth as a person. I am able to look back at the me who was writing the post at that point of time and see what has changed in me since then. I'd like to take this time to thank any readers who has faithfully come back to read The Watch Post time and again, it has been a real pleasant journey with you all.